Shorted conductors, pairs or loop- back plug (4) Define a capability detection function that works with a powered and an unpowered device July 11 - 12, 2000 DTE Power via MDI TF DTE Power Objectives (5) Select the voltage, minimum and maximum current and wattage to be supplied (6) Add appropriate management objects for power capability and status (7) Support current standard, 4- pair, horizontal cabling infrastructure for installed Cat 3 and Cat 5 cabling (8) Preserve the signal transmission and isolation characteristics of existing equipment and cabling (9) Maintain normal functionality of Link Integrity Test function in legacy and new devices (10) Consider mid- span power insertion, powering over the signal pairs, and interaction with other RJ- 45 interfaces: Token Ring, ATM, FDDI TP- PMD, 1000BASE- T, ISDN, networking test equipment, PBX, IEEE 1394, devices listed in ISO/ IEC 11801 : 1995 Annex G July 11 - 12, 2000 DTE Power via MDI TF Decision List • Maximum Voltage (Objective 5) • Maximum and minimum current (Objective 5) • Are classifications required, and (if so) how many (Objective 6) • Detection to be made on same pair as power • Which pair(s)?