IEEE P802.3ck D3.0 100/200/400 Gb/s Electrical Interfaces Task Force Initial Sponsor ballot comments # I-157Cl FM SC FM P 1 L 10 Comment Type E Missing amendment number SuggestedRemedy Insert amendmen
Point-to-Point Coherent Optics P2P Coherent Optics Physical Layer 1.0 Specification P2PCO-SP-PHYv1.0-I01-180629 ISSUED Notice This Point-to-Point Coherent Optics Specification is the result of a coope
RevCom Submission of IEEE P802.16 2001-10-24 (modified 2001-10-31) IEEE 802.16-01/54r2 IEEE 802.16 Working Group on Broadband Wireless Access http://WirelessMAN.org Dr. Roger B. Marks 325 Broadway, MC
MainTable IEEE P802.3cc D2.0 25Gb/s Ethernet Over Single-Mode Fiber Initial Working Group ballot comments # 77Cl FM SC FM P 1 L 1 Comment Type E Amendment is to IEEE Std. 802.3-2015 as amended by (lis
H-ARQ support corrections, for OFDMA PHY mode 2004-04-28 IEEE C802.16d-04/74r3 Project IEEE 802.16 Broadband Wireless Access Working Group Title H-ARQ support corrections, for
H-ARQ support corrections, for OFDMA PHY mode 2004-04-22 IEEE C802.16d-04/74r1 Project IEEE 802.16 Broadband Wireless Access Working Group Title H-ARQ support corrections, for
IEEE P802.3cz D3.1 Multi-Gigabit Optical Automotive Ethernet 1st Sponsor recirculation ballot comments # R1-64Cl 0 SC 0 P L Comment Type GR There are no hyperlinks in the document and there are no boo
MainTable P802.3ah Draft 3.2 Comments # 99349Cl 00 SC P L Comment Type TR There is no provision in the draft to assure that the required disclaimer text (Ref: SB Ops Manual 5.9.3) will be included in
MainTable IEEE P802.3cg D3.1 Physical Layer Specifications and Management Parameters for 10 Mb/s Operation and Associated Power Delivery over a Single Balanced Pair of Conductors 1st Sponsor recircula
IEEE P802.3ch D2.0 Physical Layer Specifications and Management Parameters for Greater Than 1 Gb/s Automotive Ethernet Initial Working Group ballot comments P802.3ch D2.0 # 96Cl FM SC P 1 L 13 Comment
MainTable IEEE P802.3cg D3.1 Physical Layer Specifications and Management Parameters for 10 Mb/s Operation and Associated Power Delivery over a Single Balanced Pair of Conductors 1st Sponsor recircula
IEEE P802.3ch D2.0 Physical Layer Specifications and Management Parameters for Greater Than 1 Gb/s Automotive Ethernet Initial Working Group ballot comments P802.3ch D2.0 205Cl 00 SC 0 P L Comment Typ
MainTable IEEE P802.3cg D3.1 Physical Layer Specifications and Management Parameters for 10 Mb/s Operation and Associated Power Delivery over a Single Balanced Pair of Conductors 1st Sponsor recircula
802.3ae IEEE P802.3ba D2.1 40Gb/s and 100Gb/s Ethernet comments Draft 2.1 Comments Working Group ballot Proposed Response # 1Cl 73 SC 73.9.1 P 101 L 32 Comment Type TR This is a pile on to unsatisfied
802.3ae IEEE P802.3ba D2.1 40Gb/s and 100Gb/s Ethernet comments Draft 2.1 Comments Working Group ballot # 297Cl 00 SC P L Comment Type ER The term 'nAUI" should be used rather than XLAUI / CAUI when t
MainTable comments Response # 1Cl 33 SC 2.1a P 18 L 37 Comment Type E Definitions properly belong in Clause 1. SuggestedRemedy Move these definitions to Clause 1. Remove 33.2.1a. ACCEPT IN PRINCIPLE.
MainTable IEEE P802.3bj D1.0 100 Gb/s Backplane and Copper Cable 1st Task Force review comments # 286Cl 00 SC 0 P L Comment Type ER For channel parameters, "differential insertion loss" and "insertion
MainTable comments # 171Cl 00 SC 0 P L Comment Type ER Regarding the figures and for the purpose of this review it may be easier to include the figures being replaced with the original figure with a s
MainTable IEEE P802.3cg D3.1 Physical Layer Specifications and Management Parameters for 10 Mb/s Operation and Associated Power Delivery over a Single Balanced Pair of Conductors 1st Sponsor recircula
IEEE P802.3ck D3.0 100/200/400 Gb/s Electrical Interfaces Task Force Initial Sponsor ballot comments # I-157Cl FM SC FM P 1 L 10 Comment Type E Missing amendment number SuggestedRemedy Insert amendmen
MainTable IEEE P802.3cg D3.1 Physical Layer Specifications and Management Parameters for 10 Mb/s Operation and Associated Power Delivery over a Single Balanced Pair of Conductors 1st Sponsor recircula
MainTable IEEE P802.3cg D3.1 Physical Layer Specifications and Management Parameters for 10 Mb/s Operation and Associated Power Delivery over a Single Balanced Pair of Conductors 1st Sponsor recircula
MainTable IEEE P802.3bj D1.0 100 Gb/s Backplane and Copper Cable 1st Task Force review comments Proposed Response # 1Cl 93 SC 93.8.1 Table 93-4 P 131 L 11 Comment Type T Common mode DC output voltage