802.3ae IEEE P802.3ba D1.1 40Gb/s and 100Gb/s Ethernet comments Draft 1.1 Comments Task force Review # 501Cl 00 SC 0 P L Comment Type T The draft is not consistent in its use of significant digits. Fo
802.3ae IEEE P802.3ba D1.1 40Gb/s and 100Gb/s Ethernet comments Draft 1.1 Comments Task force Review Response # 1Cl 45 SC 45.2.1.1.4a P 42 L 1 Comment Type T If local clock frequencies are different,
MainTable IEEE 802.3av D1.1 10G EPON comments IEEE 802.3av Draft 1.1 Initial Comments Input # 825Cl 00 SC 0 P L Comment Type TR There should be test vectors for the RS(255, 223) code SuggestedRemedy I
MainTable IEEE P802.3an Draft 2.2 Comments # 183Cl 00 SC P L Comment Type E The IEEE editor is converting all occurances of Times font to Times New Roman and Helvetica to Arial in publication preparat
MainTable IEEE P802.3az D2.1 Energy Efficient Ethernet comments Comments received November 2009 # 10174Cl 00 SC 0 P 1 L 1 Comment Type TR This is a general comment regarding the structure of the draft
MainTable IEEE P802.3an Draft 2.2 Comments # 1Cl 55 SC 55.5 P 133 L 42 Comment Type E In 55.5.3.4 p.133 lines 38-54, the notation in equation 55-9 needs to be improved. If the units of f are MHz, then
MainTable IEEE P802.3az D2.1 Energy Efficient Ethernet commentsResponses November 2009 Response # 1Cl 01 SC 1.4 P 14 L 28 Comment Type E There should be a space between a number and its unit. This sho
MainTable IEEE P802.3az D2.1 Energy Efficient Ethernet commentsResponses November 2009 # 265Cl 00 SC 0 P L Comment Type ER Protocol implementation conformance statements throughout the document use in
MainTable IEEE P802.3az D2.1 Energy Efficient Ethernet comments Comments received November 2009 Proposed Response # 1Cl 01 SC 1.4 P 14 L 28 Comment Type E There should be a space between a number and
IEEE P802.3df D3.0 Initial Sponsor ballot comments # I-2Cl FM SC FM P 1 L 29 Comment Type E The order of amendments to IEEE Std 802.3-2022 has been adjusted such that 802.3df precedes 802.3cw, with th
MainTable IEEE P802.3cp D2.0 Bidirectional 10 Gb/s, 25 Gb/s, and 50 Gb/s Optical Access PHYs Initial Working Group ballot comments # 147Cl FM SC FM P1 L10 Comment Type ER State this is amendment 11 an
Project Project IEEE 802.21 Media Independent Handover Services < http://www.ieee802.org/21/ > Title MEDIA INDEPENDENT HANDOVER Date Submitted May, 2005 Source(s) Joint Harmonized Contribution Re: Abs
Microsoft PowerPoint - 01.0 sg-whitespace-09-0055-00-0000-TV-Whitespace-Tutorial-Intro.ppt March 09 Matthew Sherman, BAE Systems 1 sg-whitespace-09-0055-00-0000 Project IEEE 802 Executive Committee St
MainTable IEEE P802.11n D11.0 Enhancements for Higher Throughput comments # 148Cl 00 SC P L Comment Type TR STBC modes should be mandatory, as they improve range and robustness SuggestedRemedy Remove
P802.16/D4 Sponsor Ballot Comment Resolution Report 2001/09/13 IEEE 802.16-01/47 Roger Marks EditorialType Starting Page # Starting Line # Section Make editorial changes as recommended by IEEE staff P
IEEE P802.3bq D2.0 Physical Layer and Management Parameters for 40Gb/s Operation, Type 40GBASE-T Initial Working Group ballot comments # 482Cl 00 SC P L Comment Type E For Figure 113-1, use similar fo
802.16.1 Task Group Review Comments for Session #9 2000-09-05 IEEE 802.16.1c-00/05 Project IEEE 802.16 Broadband Wireless Access Working Group Title 802.16.1 Task Group Review
IEEE P802.3bq D2.0 Physical Layer and Management Parameters for 40Gb/s Operation, Type 40GBASE-T Initial Working Group ballot comments Response # 1Cl 01 SC 1.4 P 20 L 21 Comment Type T It is not clear
IEEE P802.3bq D2.0 Physical Layer and Management Parameters for 40Gb/s Operation, Type 40GBASE-T Initial Working Group ballot comments 116Cl 00 SC 0 P L Comment Type TR The objectives of the P802.3bq